IBE d.d.
Project

Project

Brežice Hydropower Plant

Facility name

Brežice Hydropower Plant

Investor / Client

Hidroelektrarne na spodnji Savi, d.o.o.; Slovenija

Location

Brežice, Slovenia

Time period

2008-2017

Facility size / capacity

Rated power: 45.3 MW, installed power: 3 x 21.3 MW/ 3 x 21.5 MVA

The Brežice hydroelectric power plant is the penultimate and most powerful in a chain of six hydroelectric power plants on the Lower Sava River, and the first IBE project designed in BIM technology.

General

The Brežice hydroelectric power plant, with a rated capacity of 51.8 MW, represents the penultimate stage in a series of six hydroelectric power plants designed on the Lower Sava River section. Its design is based on the storage-flow type, equipped with three double-regulated vertical Kaplan turbines and five overflow fields.

With a rated flow of 500 m³/s and a drop of 11 metres, the plant exploits the water potential of a storage basin with a volume of 19,300,000 m³. These resources allow the annual production of 161 GWh of electricity from a renewable source, highlighting the key role of the plant in a sustainable energy system.

With the electricity generated, it can supply approximately 42,370 households.

General

Flood safety

Ensuring flood safety is a key issue in the design of a hydropower plant, and this was a particular challenge for the Brežice HPP, as the reservoir is located in an area of large natural flood water storage.


To address this problem, a 150 m long flood overflow was built on the left bank, which floods the retention area in a controlled manner through seven 20 m overflow fields when the Sava River flows reach 2,900 m3/s at the Krško HPP.

Flood safety

Ecology and Environment

In an effort to preserve the ecological balance of the river, an aquatic organism passage (fish passage) was built on the left bank, next to the dam structure of the Brežice Hydroelectric Power Plant, which, over a length of 920 m, allows aquatic organisms to overcome the 16 m difference in height between the upper and lower water.

It consists of an L-shaped inlet structure, equipped with 6 control gates and surrounded by 15 prefabricated reinforced concrete chambers, and an 832 m long nature-like section, designed with pools, hiding places and spawning areas, which provide refuges for a number of species.

Ecology and Environment

IBE services

As part of the services, IBE produced for the client:

- Conceptual design,

- Investment Programme,

- Project for obtaining a building permit,

- Tender project,

- Project for construction implementation,

- As-built project documentation.

Similar energy projects

Piva Hydropower Plant

Piva Hydropower Plant

Brestanica Thermal Power Plant

Brestanica Thermal Power Plant

Litostroj Substation

Litostroj Substation

Back to list
Back to top